Sandal Woods

Woodworking with passion

  • Home
  • Conferences
    • Cincinnati 2011
    • Cincinnati – 2010
    • Berea – 2008
    • St Charles – 2009
    • Valley Forge – 2009
    • Shows
  • Gallery
  • Design
  • Kneelers
  • Links
  • Archives
  • Blog
  • JIGS
  • More stuff
    • EDUCATION
    • FEATURED
    • JOINERY
    • REVIEWS
    • TOOLS
  • TUTORIAL
  • Video
  • Sponsors and Affiliates
    • StudioPress Themes for WordPress
  • Contact
  • Livestream
Home Archives for Conference St Charles

November 5, 2014 By Al Navas

The Thomas Moser keynote speech video is back

One of my readers wondered what happened to the Thomas Moser keynote speech video from the Woodworking in America conference at St Charles, Illinois, in 2009.

As I mentioned not long ago, I am in the process of uploading much of the old the video content into my new YouTube channel. Last night I uploaded the Moser video. You will find it in the original blog article, here.

The following is a screen grab from the video:

Moser: Still use hand tools.

Moser: Still use hand tools.

Enjoy!

— Al Navas

Filed Under: Blog, Conference, St Charles, Video, Woodworking in America Tagged With: 2009, St Charles, thomas moser

December 30, 2009 By Al Navas

Looking back on 2009

With 2009 done, I look back at the most-read and popular articles of the year, and find an interesting mix: Building, machine setup and use, techniques, and how-to articles topped the list. Videos, too, were extremely popular; not quite viral in 2008, the 1-minute video about the Schwarz Dances continued to be extremely popular.

And now, the top articles:

The single most popular article was about Ron Brese, his new hand plane, and his design philosophy. From that article: “As owner of Brese Plane in Thomaston, Georgia, USA, makes wonderful infill hand planes. In recent communication via e-mail I asked Ron about his approach and philosophy to a brand-new hand plane he unveils right now; I also asked him if he would allow me publish the first photos on this blog, and he agreed (photos below). Folks, get ready for a non-infill hand plane from Brese Plane – a stainless steel hand plane, at that!”

.

From early in 2008, My setup for resawing on the band saw continues to be a very popular item, and is number two this year. It thrills me when I receive an e-mail message telling me that a woodworker has solved a vexing resawing problem with their machine, and that my article played a role. I continue to rely on the band saw to make drawer bottoms, for example, from thicker stock. Other articles about resawing can be found here.

.

The FMT Pro and the Super FMT articles were also extremely popular. I have had the FMT Pro in the shop for several years, and is my go-to machine for all projects requiring mortise and tenon joinery (I love it!). And, although it arrived late in the year, the Super FMT is attracting a lot of attention due to its lower price, while keeping all the features of the Pro version. Leigh Industries sent me the Super FMT to evaluate; I have been using it in the shop, and continue evaluation as time permits. In case you missed it, this article on workholding and consistency with the FMT (Pro) is quickly becoming a favorite with many readers, based on feedback I have received since its publication.

.

When Things Go Wrong, my story about tearout like I had never experienced, hit a nerve with my readers. Of course, it helped that Sharpening Guru Ron Hock also published my story on his new blog, The Sharpening Blog. I always recommend setting aside some shop time to do maintenance on the power tools – January is usually the month in which I do this in my shop, as it is a convenient time of the year. Last January, the blades on my DeWalt planer looked fine; but I should have known better, for I have had the machine close to 5 years, and had never rotated the blades to expose the  new edge (my model has dual edges)!

.

Although Sandy has not been able to spend much time in the shop much for the last two years, the article about her band saw box continues to be a very popular article. She had never made a box like this; but a local sawyer gave us an oak burl from his scrap pile, and Sandy knew immediately what she would make. Once made, she donated it to a local church, and was sold at a Silent Auction in October 2007. A few weeks later she demonstrated to our Woodworkers Guild how to make these boxes – and that was a very popular session, too!

.



.

My article about the new dovetail chisel from Czeck Edge was extremely popular. In the article I said “I felt lucky to get one of the new Czeck Edge Hand Tool dovetail chisels while I was in Cincinnati last week. The dovetail chisel is “…a design collaboration…” between Bob Zajicek and Jameel Abraham, of Benchcrafted. I promised Bob Zajicek, owner of Czeck Edge, I would use this little jewel as soon as I got back home…” Shown on the photo is the original version of the chisel; but Bob is already producing a second version, with a tapered and beveled rib, to allow getting into tight corners.

.

.

.

How about some videos? These are extremely popular! The top videos this year were:

  1. Mario Rodriguez, at Woodworking in America (WIA) at Valley Forge, PA: Making and Fitting Drawers
  2. Bob Lang, at Woodworking in America at St Charles, Ill.: Arts & Crafts Style: The Unadorned Truth
  3. Roy Underhill, also from the Valley Forge WIA conference: Dovetails, the details
  4. Bob Lang, in St Charles: What SketchUp can do for you
  5. Christopher Schwarz, at Woodworking in America, Berea, KY: This ain’t no Tango

.I thank you all for reading my blog, and for your support. I wish everyone a wonderful, safe, and Happy New Year!

.

—— Al Navas

Filed Under: Blog, Brese Plane, Conference, Czeck Edge, Jigs, Leigh jig, St Charles, Super FMT, Tools, Valley Forge, Woodworking in America Tagged With: 2009, FMT Pro, most popular, review, Super FMT, top reading, year

September 27, 2009 By Al Navas

WIA St Charles: Keynote address by Tom Moser – Artistry in Wood

From the abstract provided as a hand-out during the Woodworking in America Furniture Construction and Design Conference in St Charles, Ill.:

…In this slide-filled lecture, Tom Moser relates the process of discovery that led him to furniture design, and how the Shaker community located near his first shop in New Gloucester, Maine has influenced his work.

Family, personal, and company memories flowed in Mr. Moser’s presentation to an audience of several hundred at the banquet held during the conference. He was funny, affable, and down-to-earth; a perfect gentleman and the consummate businessman. The slide show journey brought the audience from the humble beginnings of Thos. Moser, Cabinetmakers, to the enormous success it is today.

A personal note: The description of the Moser’s travels in Asia took Sandy and I back in time. Immediately following the dinner and speech we were lucky to run into Mr Moser and his wonderful wife Mary in the hallway. In passing them I asked him a short question about a certain locale in Asia, not wanting to detract from their conversation with someone else. His eyes lit up, and we spent the next 20 minutes together, reminiscing with relish about locales and details from our parallel journeys almost 20 years apart. This was a wonderful end to a terrific speech about the exciting life experience of the Mosers.

My hope is that in this edited version of a one-hour speech you are able to also glean into the life the Mosers, and the company they have built. It is a great journey, filled with great successes and a few setbacks.

I also hope that the story of Thos. Moser, Cabinetmakers, will get you in the mood to plan on attending the next Woodworking in America Hand Tools and Techniques conference, coming up soon in Valley Forge, Pa. October 2-4.

.

Filed Under: Blog, Conference, St Charles, Video, Woodworking in America Tagged With: Conference, keynote speech, St Charles Ill, thomas moser, Woodworking in America

  • 1
  • 2
  • 3
  • 4
  • Next Page »

Search this blog

Subscribe via feedburner – still!

Enter your email address:

Delivered by FeedBurner

Follow me on Google+

The RTJ400 at Leigh Industries


Leigh Industries introduces this new jig, designed specifically for use on the router table.
Click on the image above to go to the RTJ400 page at the Leigh website. I am NOT paid for your clicks.

The Sandal Woods prayer kneeler

The Sandal Woods prie Dieu, or prayer kneeler: Place your order for a prie Dieu for you home altar. [More...]

Admin

  • Log in
  • Entries RSS
  • Comments RSS
  • WordPress.org

Copyright © 2007-2014 | Al Navas, Sandal Woods - Fine Woodworking | Missouri, USA · Log in ·