From the catalog listing (click on the router bit image above to go directly to the Sommerfeld web page):

Now you can easily produce dozens of different profiles with the same bit. Simply adjusting the height of the bit or the position of your router table fence and making multiple passes can create small or large moldings. To create small moldings, route your profile onto a large piece of stock and then trim off on the table saw.

Pretty cool!

Deadline to enter: Midnight Wednesday September 30, 2009.

To register for the drawing, send me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all who have participated in the past, and a special thanks to our sponsor.

To register for the drawing, send me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all who have participated in the past, and a special thanks to our sponsor.

.

Deadline to enter: Midnight Monday August 31, 2009.

To register for the drawing, send me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all who have participated in the past, and a special thanks to our sponsor.

.

If you have not registered for the monthly drawings, you can do so by sending me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all who have participated in the past, and a special thanks to our sponsor.

The details for this router bit set can be found here, on the Sommerfeld Tools web site.

If you have not registered for the monthly drawings, you can do so by sending me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all who have participated in the past, and a special thanks to our sponsor.

.

If you have not registered for the monthly drawings, you can do so by sending me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all who have participated, and a special thanks to our sponsor.

.

I am pleased to announce that a lucky person will win the Classic Country cabinet door-making template set:

From the Sommerfeld web page:

Some woodworkers have avoided making arched raised panel doors for two reasons: the difficulty of making arched cuts and the expense of hold-down jigs. This system solves both problems by eliminating the need for high-cost hold-down jigs. Each of our five twenty-piece template packages includes ten sizes for the panels and the ten corresponding templates for the matching arched rails. Each template is individually stamped with its size which indicates overall door width; any door between 9-1/2″ and 22″ can be made. All templates are made of rugged HDPE plastic for years of use.

If you have not registered for the monthly drawings, you can do so by sending me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

My thanks to all, and a special thanks to our sponsor:

My thanks to all who entered; and a special thanks to our drawing sponsor, Sommerfeld Tools.

For readers in North America only (sorry, cannot ship outside North America):

If you have not registered for the monthly drawings, you can do so by sending me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

.

The winner is Fabian Little, of Pikeville, KY. Congratulations, Fabian – you win the 16-piece Forstner bit set:

My set looks like the one in this photo, not as I showed in the original post announcing the April drawing.

If you have not registered, you can do so by sending me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

Thanks to our monthly drawing sponsor:

.

I am pleased to announce the April drawing / giveaway from Sommerfeld Tools. This month we will give away the 16-piece Forstner bit set:

One lucky winner in North America (sorry – cannot ship outside N. America at this time). You will find additional details on this set on the Sommerfeld Tools web page, and in their catalog.

To register for the drawings, send me an e-mail to sandal_woods@bbwi.net with your name and full address; I cannot accept your entry if it does not have all the information. And please remember that if you have registered for the monthly drawings before, you do not have to register again.

Good luck to everyone!

.